Advertisement
Our Working at Heights training program was created and developed by NATT Safety Services and is CPO approved (PRO-34727).https://nattgroup.ca/events/1-working-at-heights/location-Barrie/
Working at Heights Training
The aim for this training is to create the easiest and safest solution when working at heights. This training allows you to recognize and avoid hazards associated with working at heights.
Duration
6.5 hours theory + practical
Course Topics- Theory
Rights and Responsibilities
Identification of the Hazards of Working at Heights
Eliminating or Controlling the Hazards of Working at Heights
Heights Warning Methods and Physical Barriers
Ladders and Similar Equipment
Personal Fall Protection Equipment
Course Topics- Practical
Barriers and Other Fixed Equipment
Personal Fall Protection Equipment
Anchor Points
Work Access Equipment and Platforms
Rescue Planning
You must achieve an 80% or higher on the written evaluation and successfully complete the practical evaluation in order to successfully complete the course.
Legislation
The Occupational Health and Safety Awareness and Training Regulation (Ontario Regulation 297/13) under the OHS Act clearly sets out WAH as a mandatory requirement.
In addition to these requirements, employers continue to have a duty under subsection 26.2 (1) of O. Reg. 213/91 (Construction Projects) to ensure that workers who may use a fall protection system are adequately trained on the use of the system, and are given adequate oral and written instructions by a competent person.
Employers with workers who are required by O. Reg. 213/91 (Construction Projects) to use any of the fall protection methods listed above must do the following:
Ensure the worker completes a working at heights training program that has been approved by the CPO as having met the Working at Heights Training Program Standard applicable at the time of the training;
Ensure the training provider delivering the training program was approved by the CPO as having met the Working at Heights Training Provider Standard applicable at the time of training;
Ensure the worker’s training is valid and has not expired;
Maintain a training record for the worker that includes the worker’s name, the approved training provider’s name, the date the training was completed and the name of the approved training program;
And make the training record available to a Ministry of Labour inspector on request.
Who Requires Working at Heights Training
Any worker who is required under Ontario Regulation 213/91 (Construction Projects) to use any of the following methods of fall protection:
A travel restraint system
A fall restricting system
A fall arrest system
A safety net�
A work belt
A safety belt under O.Reg 253/14, s. 1.
Working at Heights Course Benefits
Successful participants of the Working at Heights training will receive their certification for a 3-year period.
Prerequisites
Work boots
Safety glasses
Gloves
Long sleeve top
Full length pants
Hard hat
Safety Harness
Advertisement
Event Venue & Nearby Stays
54 Cedar Pointe Dr, Barrie, ON L4N 5R7, Canada
Concerts, fests, parties, meetups - all the happenings, one place.
