Advertisement
We will be running 1 course for class 1, 2 courses for class 2, and 1 course for class 3. Depending on the number of entries we may do a second class 1 course. Entry fee is $20 per driver in each class. Trucks can be shared. But each driver must pay the entry fee. Pay out will be 60/30/10 for 1st 2nd and 3rd in each class. $5 from each drivers entry will go towards the end of the year prize money for the best accumulated score over the 4 events in each class. So if you want a chance at the end of the year pot you must attend all 4 comps.
Scale Comp Rules
Points
Progress -2
Reverse +1
Gate Marker +10
Rollover +5
Boundary Marker +10
Vehicle Touch +10
Course Direction +10
Self Recovery (Winch) +3
Assisted Recovery +10
Bonus gates -10
Point Out +60
General Vehicle Guidelines
Vehicle and accessories must resemble 1:1
Event officials have full discretion to determine if a vehicle is accepted.
No motor on axle or twin vertical plate rigs are allowed
There are no wheel distinctions. For example, you can run a 1.55, 1.7, 1.9, 2.2 rim in any class. Wheels larger than 2.2 and split diameter short course wheels are not allowed in either class.
Tires should be scale appearing. No comp tires allowed, for example, voodoo pins, HB Rovers, HB Sedonas
Jconcepts megalithics are allowed in all classes.
No bolt on or comp style wheel weight systems, such as dlux fab weight hangers. Wheels must be enclosed with no foam exposed.
Modified and Unlimited Class Rigs MUST have a minimum of 6 scale items. (example: side mirrors, d ring, winch, sand ladder, driver, steering wheel, hubs, tow rope)
Class 1
Full 2023 sorrca rule set with a max of -60 scale points. (This will be the only class to receive scale points. And the only sorrca based class) refer to the sorrca rule book on their facebook page
Class 2
Tires must be 4.75” or less
Front bumpers are required. Bumper must be wider than the chassis rails and extend beyond the body or cage work.
Full rail chassis are required and rails must be 1” longer than the wheelbase
Truggies are allowed, but must replace the ladder frame behind the cab with tube and the truggy rails must extend past the rear axle pumpkin to be legal.
No dig or rear steering allowed
Body must me atleast 4.25 inches tall from bottom of rockers to top of roof.
Gates will be a minimum of 12” wide
Must run a minimum of 6 scale items
Class 3
Tires must be between 5.25”- 6”
Body/Chassis must be at least as long as the wheelbase of the vehicle.
Full tubers are allowed
No bumpers required
Dig or rear steer is allowed.
Body must be atleast 4 inches tall from bottom of rockers to top of roof
Gates will be a minimum of 16”
Must run a minimum of 6 scale items
Advertisement
Event Venue & Nearby Stays
9501 W Kellogg Dr, Wichita, KS 67209-1885, United States
