Advertisement
It’s time for the annual November throwdown cash comp. This is a 2 day event, Saturday is class 2 then Sunday we run class 1 and 3. There will be 3 courses for each class with a finals course for the top 5 in each. Scores from the first 3 course will roll over into the finals course. It is $20 for each class you want to run with 100% payout to the top 3 at a 60/30/10 split. 6 minute time limit per course with 10 gates and 2 bonus gates (bonus will be -10 points) we will be teching in trucks starting at 8 and ready to run courses by 9 each morning and courses will close at 430 Saturday and 4 on Sunday so we have time to run finals before it’s dark. If we get rained out it will move I doors to high voltage garage
We will be running the new crawlapalooza rules for each class so read them and follow them so you don’t get mad that your truck doesn’t fit the rules.
Trail Class (similar to Class 1)
-Vehicle and accessories must resemble 1:1
-Event officials have full discretion to determine if a vehicle is accepted.
-No motor on axle rigs are allowed.
-There are no wheel distinctions. For example, you can run a 1.55, 1.7, 1.9, 2.2 rim . No Wheels larger than 2.2.
-No bolt on or comp style wheel weight systems, such as dlux fab weight hangers. Wheels must have no foam exposed.
-Tire must be 4.19” or less, no tire modifications allowed.
-Wheelbase must be no more than ½” larger or shorter than the body from center of the front wheel well to center of the rear wheel well.
-Full width front and rear bumpers are required. Bumpers MUST extend beyond the body. Bumpers must be at least the width of your front windshield at its widest point.
-Hard Bodies are required (No Lexan).
-No Pinching, dovetailing, narrowing, or boat sides.
-Front windshield is required.
-A 2d or 3d interior is required.
-No truggies or tubers.
-Chassis rails must be 1” longer than wheelbase.
-Flatbeds are allowed as long as they are the same width as the cab at its widest point and the length is beyond the frame rails. No cab only allowed.
-Gates will be a minimum of 11” wide .
-Tires cannot exceed more than half the tread width beyond the width of the body. Flares can be used to extend the width if needed. No tape/foam fender flares allowed
-Must run a minimum of 15 scale items. Rule required scale items do not get scale points. Duplicate scale items do not get additional scale points.
-No dig or rear steering allowed
Modified Class (similar to Class 2)
-Vehicle and accessories must resemble 1:1
-Event officials have full discretion to determine if a vehicle is accepted.
-No motor on axle rigs are allowed.
-There are no wheel distinctions. For example, you can run a 1.55, 1.7, 1.9, 2.2 rim. No Wheels larger than 2.2.
No bolt on or comp style wheel weight systems, such as dlux fab weight hangers. Wheels must have no foam exposed.
-Tires must be 4.75” or less
-Front bumpers are required. Bumper must be wider than the chassis rails and extend beyond the body or cage work.
-Chassis rails must be 1” longer than the wheelbase
-Truggies are allowed, but must replace the ladder frame behind the cab with tube and the truggy rails must extend past the rear axle pumpkin to be legal.
-Bodies must be a minimum of 4" tall (measured with the body held horizontal) and a minimum of 5" wide and a minimum of 9" long .
- No dig or rear steering allowed.
-Gates will be a minimum of 12” wide
-Must run a minimum of 10 scale items. Rule required scale items do not get scale points. Duplicate scale items do not get additional scale points.
Unlimited Class (similar to Class 3)
-Vehicle and accessories must resemble 1:1
Event officials have full discretion to determine if a vehicle is accepted.
-No motor on axle rigs are allowed.
-There are no wheel distinctions. For example, you can run a 1.55, 1.7, 1.9, 2.2 rim in any class. No Wheels larger than 2.2.
-No bolt on or comp style wheel weight systems, such as dlux fab weight hangers. Wheels must have no foam exposed.
-Tires must be between 5.25”- 6”
-Bodies must be a minimum of 4" tall (measured with the body held horizontal) and a minimum of 5" wide and a minimum of 9" long .
-Chassis must be at least as long as the wheelbase of the vehicle.
-Full tubers are allowed
-No bumpers required
-Dig and rear steer is allowed.
-Gates will be a minimum of 16”
-Must run a minimum of 6 scale items. Rule required scale items do not get scale points. Duplicate scale items do not get additional scale points.
-Example Scale Items : Tow Rope , Jerry can , First aid kit , Sand Ladder , Winch , Realistic Lockout Hubs , Shovel , Axe , Crate , Tool Box , Cargo rack , Cooler , Propane tank , Floor jack, Roto Pax , Rifle , Tools , D-ring , Snatch-Block , Land Anchor . Disc rotor set, sleeping bag, Side mirrors,Spare tire, Functioning headlights and taillights , light bar , canoe , antenna , license plate ....
Advertisement
Event Venue & Nearby Stays
Air Capital Memorial Park Singletrack, Wichita, Kansas, United States
Concerts, fests, parties, meetups - all the happenings, one place.
