JBL Audio Designer Level 2

Objective:
JBL Audio Designer Level 2 training is an advanced course designed for audio professionals who want to gain deeper knowledge and hands-on experience with JBL’s Audio Designer Software for system design, configuration, and optimization of JBL professional loudspeakers, power amplifiers, and networked audio systems. This course builds on foundational skills, providing participants with advanced techniques for system design, troubleshooting, and fine-tuning in large-scale or complex installations.

• Overview of JBL Audio Designer:
• • A brief review of key features and capabilities of JBL Audio Designer Software, including project creation, system simulation, loudspeaker selection, and system optimization.
  • Recap of basic tools for configuring loudspeakers, amplifiers, and networked systems.
• Level 1 Foundation:
• • Overview of concepts covered in Level 1, such as loudspeaker modeling, signal routing, and basic room acoustics simulation.

• Advanced Loudspeaker Selection:
• • Techniques for selecting the most appropriate JBL loudspeakers based on advanced parameters such as coverage patterns, output power, and frequency response.
  • Working with line arrays and subwoofers to create complex system configurations.
• Array Design and Simulation:
• • Best practices for designing and configuring line arrays using JBL’s array calculators and simulation tools in the software.
  • Advanced techniques for configuring subwoofer arrays, including cardioid arrays, end-fire, and broadside configurations to optimize bass performance.

• System Design Workflow:
• • Advanced techniques for creating detailed system designs, including multi-zone or multi-room configurations for large installations.
  • Integrating JBL speakers with other networked devices and components such as Crown amplifiers, BSS processors, and audio distribution systems.
• Room Acoustics and Coverage Optimization:
• • Techniques for analyzing and optimizing coverage in complex or irregularly shaped spaces using room simulation and 3D visualization tools.
  • Implementing advanced acoustical treatments and adjusting designs to account for room reflections, absorption, and other acoustic challenges.

• DSP Settings and Integration:
• • Advanced DSP configuration for JBL amplifiers and processors, focusing on optimizing system performance across a wide frequency range.
  • Adjusting EQ, crossover, delay, and limiting for complex systems, including multiple speaker zones and large-scale arrays.
• Signal Routing and Networking:
• • Using JBL Audio Designer to set up networked audio systems and configure Dante, AES67, and AVB protocols for audio over IP.
  • Advanced network configuration and troubleshooting techniques to ensure smooth, low-latency audio transmission and reliable system performance.

• Advanced System Tuning:
• • Using JBL’s Live Sound Calibration tools and software features like SonicWave™ to fine-tune the system and optimize audio performance for different environments.
  • Techniques for measuring sound pressure levels (SPL), frequency response, and phase alignment for each loudspeaker zone.
• Advanced Subwoofer Tuning:
• • Methods for tuning subwoofers to achieve optimal low-end performance, including setting up delay and polarity for subwoofer arrays.
  • Use of array-based DSP settings to optimize low-frequency response and phase alignment across different listening areas.

• Troubleshooting Tools and Techniques:
• • Advanced troubleshooting techniques using JBL’s monitoring tools, such as Network Analyzer and Signal Flow Diagnostics, to identify and resolve system issues.
  • Common problems in large-scale systems, such as feedback, signal interference, and latency issues, and how to address them using software diagnostics.
• Device and Network Diagnostics:
• • Advanced methods for diagnosing issues with JBL devices, such as amplifiers, processors, and loudspeakers.
  • Monitoring networked systems for performance degradation, identifying hotspots of distortion or connectivity issues.

• Scaling Up Systems:
• • Best practices for designing scalable audio systems in large venues such as arenas, stadiums, or convention centers.
  • Designing systems with redundancy and failover capabilities, ensuring maximum reliability in mission-critical applications.
• Managing Multi-Zone Systems:
• • Advanced configuration techniques for multi-zone audio systems, including signal routing, level balancing, and audio zone grouping.
  • Ensuring consistent coverage and sound quality across multiple areas of large venues.

• Control System Integration:
• • Integrating JBL systems with third-party control systems like Crestron, AMX, and Q-SYS for centralized management of audio systems.
  • Configuring control interfaces for system volume, EQ, routing, and monitoring from a single platform.
• Automation of Audio Settings:
• • Setting up automation protocols for room scheduling, volume adjustments, and preset recalls based on user-defined scenarios.
  • Working with networked audio systems to allow automated adjustments based on system health or input changes.

• System Documentation:
• • Best practices for documenting system designs, configurations, and network settings for future reference and maintenance.
  • Creating detailed system diagrams and reports to assist with troubleshooting and future upgrades.
• Routine System Maintenance:
• • Techniques for maintaining optimal performance in large systems, including regular checks for firmware updates, system diagnostics, and component calibration.
  • Tips for managing firmware updates and software upgrades for JBL devices to ensure compatibility and stability.

• Recap of Advanced Techniques:
• • A summary of advanced techniques in JBL Audio Designer, including loudspeaker configuration, DSP tuning, and system diagnostics.
• Q&A Session:
• • An opportunity for participants to ask specific questions related to complex installations or custom system configurations.

Target Audience: AV integrators, audio engineers, and system designers responsible for the advanced design, configuration, and troubleshooting of large-scale JBL audio systems.

This JBL Audio Designer Level 2 training provides participants with the knowledge and practical skills needed to design, optimize, and troubleshoot complex audio systems using JBL professional loudspeakers and networked audio solutions. The course is focused on delivering solutions for large-scale, high-performance installations, ensuring that attendees are equipped to manage both the technical and practical challenges of professional audio design.

Event Venue & Nearby Stays

3 Ruacana Street, 3 Ruacana Street, Sandton, South Africa