About this Event
Get Course Syllabus: FRP701
Buy Course Manual: Standards SP8310, SP1010, SP1020, SP1030 and SP1040
Refunds by FRPI: See Terms and Conditions of Registration below.
Health and Safety (COVID-19 course response): The FRPI training and demonstration theater seating arrangement and care will accommodate current CDC and New Your State guidelines. Personal protective equipment shall be provided by course Registrants when deemed needed. To help provide a safer workplace and within the privacy rights of Registrants, FRPI reserves the right to require a Registrant to wear a facemask while in its training room plus investigate Registrant potential virus exposure, illness symptoms and body temperature via noncontact methods before entering its room as a means to determine fitness for entry. Please see FRPI Terms and Conditions of Registration for details.
Hotel: Arrangements for overnight stays are left up to course participants to make directly with the hotel of their choice. If flying or driving long distances in to and out of the venue, it is recommended to stay overnight before the course starts and after it ends.
Transportation: Arrangements for getting around between the airport, a hotel, restaurants and/or the FRPI training theater venue are left up to course participants to make directly with rental agencies, taxi services and/or the hotel of their choice. Some hotels between the airport and venue may provide free shuttle service between the hotel, airport and local restaurants. Check with the hotel of your choice for daily schedules.
Description: This course provides a comprehensive review and discussion of essential information pertaining to repair and alteration of Fiberglass Reinforced Plastic (“FRP”) chemical process equipment. Concepts taught apply to tanks, ASME pressure vessels and piping, covers, ductwork, vessels, stacks plus other related equipment. Learning objectives and content of this course build on relevant ASME, ASTM, DIN, FRPI and NBIC industry standards pertinent to FRP repair and alteration plus lessons learned in other FRPI courses. Numerous case histories will be shared exemplifying theory put to work in practice. Courses are conducted in a training and demonstration theater setting, with a maximum of twelve (12) participants per one (1) instructional leader. The extra-large projection screen with stereo sound capability, supplemented by hands on demonstrations integrating actual failed laminate, core specimens extracted from equipment taken out of service, pulled bond test laminates and other demonstrations, provides for an interactive learning involvement. Repair and alteration scope includes procedures to address FRPI SP1020 Visual Imperfections, SP1030 Damage Mechanisms and other fabrication anomalies or alteration necessities, where SP1010 Laminate Identification and SP1040 Integrity and Leak Testing practices are integrated into repair system qualification. Concepts covered help guide repair versus replacement decisions considering equipment damage types, deterioration rates, remaining useful life and repairability.
Key Learning Objectives: After attending this course, participants should be able to:
- Classify types of repairs following NBIC and ASME standards.
- Define detailed repair systems per ASME protocol and incorporating other standards.
- Integrate FRPI SP1010, SP1020, SP1030 and SP1040 into repair and alteration plans.
- Apply practical repair types that address most failure mechanisms and their root cause.
- Write standards complaint repair system specifications for laminate damage and imperfections.
- Fill in specifications with technical requirements where standards are silent.
- Conduct quality control for repairs and alterations.
- Recognize pertinent health and safety considerations.
- Qualify repair companies, installers, laminators, and secondary bonders.
- Implement repair and alteration consistent with ASME, ASTM, DIN, FRPI and NBIC standards.
General Course Content and Outline:
DAY 1 – Participant introductions plus course content, agenda and learning objectives overview. Introduction to and practical application of FRP repair and alteration standards. Present and discuss repair type classifications. Explore and expand on repair system definition, design, engineering, hand tools, equipment, supplies, material preparation, postcuring, environmental controls, managing unexpected conditions, surface preparation, bond testing and material application. The day will wrap up with a quiz and open participant review.
DAY 2 – Review practical applications of NBIC, ASME and other repair types for damage mechanisms, relining tanks and other structures, core specimen extraction areas, bond test sites, bottom and shell section replacement, flanges, nozzles and manways, the infamous “quick fix” plus visual imperfections found in laminating work. Concepts for quality assurance and control, health and safety related to FRP work plus ASME, NBIC and DIN standards governing installer, laminator and secondary bonder qualifications will be examined. Guidance for repair company qualification plus owner/end user support and repair oversight will be shared. The day will wrap up with a quiz and open participant review.
NOTE: Each day involves practical exchange of experience, with questions plus discussion of individual participant challenges and opportunities as time permits.
Who Should Attend:
- Inspectors and QA / QC Personnel
- FRPI 8310 Inspectors and RIT’s
- Designers, Engineers and PE’s
- Owners / End Users
- Resident Engineers
- Asset Mechanical Integrity Managers
- Specification Writers
- Operators
- Maintenance Planners
- Shop and Field Technicians
Prerequisites: Fluent in the English language. Registrants are required to present upon request their FRPI course completion certificate received for their successful participation in either FRP301, FRP401 or FRP831. This course completion certificate prerequisite may be waived for registrants holding other FRPI recognized fiberglass training certificates or with a minimum of one (1) year full time professional fiberglass experience within the past five (5) years. It is also required to purchase and review the FRPI “Aboveground Storage Tank Inspector Certification and Licensing Manual”, which includes standard practices extensively discussed during the course. Participants will be required to present a Manual copy at time of course check in, with their name included in original authentic unaltered license stamp on all Manual pages. The total of all participants from a given employer shall not exceed number of Manual copyright licenses employer has purchased. Although not required, it is recommended for participants to obtain and review standards referenced within the Manual. Prior understanding of FRP industry standards, laminate design, manufacturing and inspection may result in establishing broader and deeper learning experience.
Recognition: A course completion certificate will be issued to all attendees who participate in entire program, with sixteen (16) Professional Development Hours (“PDH’s”) recorded for professional engineers. FRPI has been vetted and is recognized by RCEP (www.rcep.net) since 2011 as a provider of continuing education for licensed professional engineers. Participants desiring PDH credits will be given a program evaluation survey at the end of course and required to complete it. See Terms and Conditions of Course Registration for more information pertaining to PDH credit opportunities.
Skill Assessment: A interactive quiz will be conducted at the conclusion of each day, with answers discussed live within the group as an ungraded learning confirmation exercise.
Instructor: Gary Arthur - FRPI Executive Director and President, Bio/CV
Terms and Conditions of Registration: FRP701 T&C's
Event Venue & Nearby Stays
Hampton Inn - FRPI Training Theater, 5444 Camp Road, Hamburg, United States
USD 1250.32 to USD 1373.04
